 Durbar is hot-rolled steel floor plate with excellent welding properties.
Durbar has an evenly distributed, raised pattern that is integral to the sheet and which provides slip resistance in a variety of applications.
The spaces between the studs create a self-draining surface, which is easy to clean. This characteristic reduces corrosion and gives Durbar a long life.
Standard and grades
EN 10025 : 2004: -
S275
S275JR
S355
S355JR
Overall dimensional range
See the product catalogue for the dimensional limits of specific products.
Thicknesses of coil and cut lengths (mm): -
3.00, 4.50, 6.00, 8.00, 10.00 and 12.50.
Standard coil widths: -
1000/1250/1500mm
Cut lengths: -
1500 - 13,000mm Load span data
Members of The Steel Construction Institute can view load span data for Durbar at www.steelbiz.org, in table C242, floor plates simply supported, from the Steel Designers Manual, 6th Edition, 2003. Technical enquiries about Durbar should be directed to the numbers below or emailed using the address in the contact box at the right. T +44 (0)1633 755171
F +44 (0)1633 755177
 |
