| |
 | |
| Durbar is hot-rolled structural steel floor plate that has an evenly distributed, raised pattern which is integral to the product. It acts as a structural component and meets the requirements of the Construction Products Directive. Its slip-resistant surface in the original Durbar pattern is easy to clean and self-draining. Corus offers standard sizes from stock in the UK and Ireland and processing is available from a network of distributors. Durbar can be used for stairs, walkways, platforms, bridges, containers, lifts, shipbuilding, offshore installations, cladding and commercial vehicles. Standards and gradesEN 10025 : 2004, S275JR+AR and S355JR+AR DimensionsStandard thickness Standard widths 3.00 1000/1250 4.50 1000/1250/1500 6.00 1000/1250/1500 8.00 1000/1250/1500 10.00 1000/1250/1500 12.50 1000/1250/1500 The thickness is that of the plain plate, exclusive of the raised pattern (typically 1.5mm-2.2mm). Standard lengths are twice the widths shown above; non-standard cut-lengths from 700mm-10,000mm are available on request. For information about grades and dimensions not shown here, please call or email us at the number listed under Sales of coil below. Sales of coil T +44 (0)121 609 5018 F +44 (0)121 609 5050 Load span data Members of The Steel Construction Institute can view load span data for Durbar at www.steelbiz.org, in table C242, floor plates simply supported, from the Steel Designers Manual, 6th Edition, 2003. | |
|
